COM-CAN/LIN Instrument

The COM-CAN/LIN Communications Module (COM-CAN/LIN-5/5) is an intelligent instrument which uses its own on-board processor to send/receive/compare Controller Area Network (CAN) and Local Interconnect Network (LIN) messages. This approach reduces software load on the external computer.

• CAN profiles consist of up to 500 message clusters consisting of transmit messages, expected receive messages, and qualification parameters
• Failures are defined as received messages that do not meet qualification parameters. They are detected by the COM-CAN/LIN-5/5 and notification is sent to the host PC
• CAN supports up to 5 repetitive (keep alive) messages
• CAN also has a manual mode which allows single messages to be sent. A follow up command allows the received message to be obtained. All channels can be selected simultaneously or individually for manual message transmission.
• Onboard system monitor keeps track of instrument temperature and supply voltages
• Profile parameters can be created off-site by included software.
• All 5 CAN channels and all 5 LIN channels can operate simultaneously
• Easy to use: user sets parameters for the channels using the included TestTRAK Software and starts the instrument.

COM-CAN/LIN Specifications

Number of Channels	5 CAN and 5 LIN
CAN Interface Types	High speed(125K-1M), Fault tolerant (low speed)(<=125K), Single Wire(33.3K, 83.3K); ISO 11898, 11519-2, J2411; standard and extended messages
CAN Baud Rates	All standard rates supported (33.3K, 83.3K, 125K, 250K, 500K, 1M)
CAN Messages/Profile	500
CAN Repetitive (Keep Alive) Messages	5 (No Triggers Needed)
CAN Repetive Message Maximum Rate	10/sec
CAN External Trigger	Message transmission is initiated by trigger; all channels controlled by one common trig; software timing also supported (no external triggers needed)
CAN External Trigger Maximum Rate	Up to 100/sec (Depends Upon Baud Rate)
LIN Interface	Slave Node
LIN Interface	Supports Version 1.3 and 2.0 Bus Standards
LIN baud Rates	All Standard Rates Supported
Ethernet Interface	Built in Web Server